產品詳情
產品報價是預付訂金
產品介紹：
1 該自動鋸由氣缸定位龍門架真空吸盤上板設備、采用板材不動鋸軸行走方式，提高了穩定性和***度、龍門架真空吸盤下板自動堆垛。 2 整個自動鋸動作由plc控制，實現鋸切與堆垛的自動化，節約人工 3 該只需一人操作即可。自動鋸由氣缸定位監控，準確，避免浪費，而且鋸出來的木板比較光滑，效果好。 4 鋸邊機帶有除塵效果好，整機各處出塵點集中，能過強力排塵。 5 采用高精度耐磨導軌，鋸邊精度高，大大提高生產效率，增加利潤。供應各種型號的四邊鋸，可根據客戶要求定做。
技術參數：
|
產品名稱： |
全自動縱橫四邊鋸 |
|
產品型號： |
SSBJ-2500 |
|
鋸軸電機： |
5.5kw/4臺 |
|
進板行走電機： |
1.5kw/1臺 0.75kw/2臺 |
|
吸盤行走電機： |
0.12kw/2臺 |
|
鋸切長度： |
2440mm - 1830mm |
|
鋸切寬度： |
1220mm – 915mm |
|
鋸切厚度： |
60mm |
|
鋸切對角線誤差： |
1mm以內 |
|
兩邊等寬直線誤差： |
0.5mm以內 |
|
鋸切行走速度： |
變頻器調速 |
?
Product Introduction:
1 The automatic saw is bed by the cylinder to locate the upper plate equipment of the gantry vacuum suction cup, and adopts the walking mode of the plate not moving saw shaft, which improves the stability and accuracy. The lower plate of the gantry vacuum suction cup is automatically stacked. 2 The entire automatic sawing b is controlled to realize the automation of sawing and stacking, saving labor. 3 It only needs one person to operate. The automatic saw is bed and monitored by the cylinder, which is accurate and avoids waste, and the sawn boards are smoother and the effect is good. 4 The edge sawing machine has a good dust removal effect, and the dust discharge points of the whole machine are concentrated, which can discharge dust excessively. 5 The use of high-precision wear-resistant guide rails and high cutting edge precision greatly improve production efficiency and increase profits. Supply various types of four-side saws, which can be customized according to customer requirements.
Technical Parameters:
|
product name: |
Automatic four-side saw |
|
Product number: |
SSBJ-2500 |
|
Saw shaft motor： |
5.5kw/4units |
|
Into the board walking motor: |
1.5kw/1units?0.75kw/2units |
|
Suction cup walking motor: |
0.12kw/2units |
|
Cutting length: |
2440mm -?1830mm |
|
Cutting b: |
1220mm –?915mm |
|
Sawing thickness: |
30mm |
|
Diagonal error of sawing: |
Within?1mm |
|
Straight line error of equal b on both sides: |
Within?0.5mm |
|
Sawing speed: |
Inverter speed regulation |
