產品詳情
產品價格是預付訂金價格
產品介紹：
1 該自動鋸由氣缸定位龍門架真空吸盤上板設備、縱鋸小車、縱鋸小車壓緊結構、縱鋸小車傳送設備、縱切鋸頭、橫鋸架、橫鋸小車、橫切鋸頭、橫鋸小車鏈條傳送設備、龍門架真空吸盤下板自動堆垛。 2 整個自動鋸動作由plc控制，實現鋸切與堆垛的自動化，節約人工 3 該只需一人操作即可。自動鋸由氣缸定位監控，準確，避免浪費，而且鋸出來的木板比較光滑，效果好。 4 鋸邊機帶有除塵效果好，整機各處出塵點集中，能過強力排塵。 5 采用高精度耐磨導軌，鋸邊精度高，大大提高生產效率，增加利潤。供應各種型號的四邊鋸，可根據客戶要求定做。
技術參數：
|
產品名稱： |
全自動縱橫四邊鋸 |
|
產品型號： |
XQSBJ-2500 |
|
鋸軸電機： |
7.5kw/4臺 |
|
進板行走電機： |
1.5kw/2臺 |
|
吸盤行走電機： |
0.12kw/2臺 |
|
鋸切長度： |
2440mm - 1830mm |
|
鋸切寬度： |
1220mm – 915mm |
|
鋸切厚度： |
60mm |
|
鋸切對角線誤差： |
1mm以內 |
|
兩邊等寬直線誤差： |
0.5mm以內 |
|
鋸切行走速度： |
變頻器調速 |
Product Introduction:
The automatic saw is made up of cylinder bing the upper plate of the vacuum sucker of the gantry frame, the longitudinal saw trolley, the compression structure of the longitudinal saw trolley, the transmission equipment of the longitudinal saw trolley, the vertical saw head, the horizontal saw frame, the horizontal saw trolley, the horizontal saw head, the chain transmission equipment of the horizontal saw trolley, and the automatic stacking of the lower plate of the vacuum sucker of the gantry frame. 2. The whole automatic saw b is controlled to realize the automation of saw cutting and stacking, saving manpower 3. Only one person can operate. Automatic saw by cylinder bing monitoring, accurate, avoid waste, and saw out of the board is relatively smooth, good effect. Saw edge machine with good dust removal effect, the whole machine everywhere dust point concentration, can too strong dust. 5 Adopt high precision wear-resisting guide rail, high precision of saw edge,greatly improve production efficiency, increase profit. Supply various types of four-sided saw, can be customized according to customer requirements.
Technical Parameters:
|
product name: |
Automatic four-side saw |
|
Product number: |
XQSBJ-2500 |
|
Saw shaft motor： |
7.5kw/4units |
|
Into the board walking motor: |
1.5kw/2units |
|
Suction cup walking motor: |
0.12kw/2units |
|
Cutting length: |
2440mm - 1830mm |
|
Cutting b: |
1220mm – 915mm |
|
Sawing thickness: |
60mm |
|
Diagonal error of sawing: |
Within 1mm |
|
Straight line error of equal b on both sides: |
Within 0.5mm |
|
Sawing speed: |
