F4303A

尊敬的客戶您好！我要用什么樣的速度，才能與你相遇,期待您的來(lái)電！珍惜這得來(lái)不易的緣。

F3423

HS2000 VSI system 3.1.1 interlock function: can complete the interlock function of "computer interlock technical conditions" of the Ministry of Railways, mainly including the following functions: Can Handle the whole station train route, shunting route and circuitous route. It has the functions of turning back in the middle of shunting, communication between stations and automatic notification of crossing. In the event of equipment failure can also handle the boot route and boot total lock. Adopt the terminal two-point processing mode. Shunting route can be handled by a few basic route composed of the long route, but also section by section. A signal belonging to a hostile route can not be opened simultaneously. The signal can only be opened if all track sections in the route are checked to be free, the relevant switches are all correct and locked in their designated bs, and the hostile relationship is checked to be correct. It has the functions of normal signal closing, special closing, automatic repeating opening and artificial repeating opening. It has automatic route unlock, halfway return unlock, cancel route unlock, manual route unlock and fault route unlock. With signal independent operation function. 3.1.2 display and operation functions display the station layout in the center of the CRT. Usually, the station line shows blue, when the route is selected and locked, the blue light band on the route becomes white, the section occupied by cars is red. When the switch is bed or reversed, the switch point is connected to its corresponding opening b respectively. When the switch is in a four-way b during the switching process, the switch point is disconnected. When the switch point is squeezed, a Red Arrow appears at the point where the switch point is disconnected, and the name of the switch is flashing, when the turnout is closed separaby, the name of the turnout is shown in bright color. When the signal is open, the SEMAPHORE is shown in the open color. When the bulb is broken, the name of the SEMAPHORE flashes red. The floor plan also shows a variety of photographic relationships. Operation of two-point approach, such as the approach to the terminal approach. 3.1.3 alarm function sets alarm b at the top of CRT screen, all equipment alarm status is reflected to alarm b in time, accompanied by voice alarm. Alarm content includes: turnout squeeze switch, signal filament broken, main filament broken, fuse broken, equipment failure. 3.1.4 other functions, such as controlling and expressing functions of section and station crossing, which are difficult to realize in 6502 electric concentrator.

F3423

HIMA F3423
HIMA F4203A
HIMA F3315 
HIMA F3113A
HIMA F3324
HIMA F4110A
HIMA F4111A
HIMA F4303A
HIMA F6251
HIMA F4301 

F4303A

F4303A