產品詳情
恒溫恒濕試驗箱（桌上型）
本產品是在一定空間內形成特定溫濕度的設備，適用于電子產品及電子零部件、精密儀器、纖維、食品、制藥、基因工程、素材等現代工業產品耐久性和可靠性測試的必備設備。在設定時間內模擬形成各種嚴酷氣候條件，可預測正常條件下的耐久性試驗。在加溫、冷卻、除濕、加濕完美調和控制下形成高精度的溫濕度環境。
????? 緊湊式設計，可放在實驗臺上使用，如使用專用臺架可放兩臺，并能同時進行不同條件的試驗。
??? 產品特點：
?水箱：本公司恒溫恒濕箱專用盒形水箱（15升）加水方便，易于清潔。雙重水位計缺水時發出警報音。
電纜孔：工作箱內放入用電試品所需要的電纜接入口，對溫濕度不產生任何影響。標配一個?50mm電纜孔，根據用戶需??????????????????????????????? 要可增設?50mm或?80mm電纜孔。（選配）
蒸發器（Evaporator）：過濾網起到灰塵及異物的過濾作用，經常保持清潔能保持冷凍系統良好效率。
接水槽：采用塑料接水槽，排水方便，易于清潔
| Model | TH3-PE-025 | TH3-PE-065 | TH3-PE-100 |
|---|---|---|---|
| Interior dimensions | |||
| Chamber volume (L / cu ft) | 25 / 0.9 | 65 / 2.3 | 100 / 3.5 |
| Width (mm / inch) | 350 / 13.8 | 400 / 15.7 | 500 / 19.7 |
| Depth (mm / inch) | 220 / 8.7 | 330 / 13.0 | 380 / 15.0 |
| Height (mm / inch) | 350 / 13.8 | 495 / 19.5 | 530 / 20.9 |
| Quantity of shelves (standard/max.) | 2/7 | 2/10 | 2/10 |
| Distance of between shelves (mm / inch) | 20 / 0.8 | 20 / 0.8 | 20 / 0.8 |
| Max. load per shelf (kg /lbs) | 25 / 55.1 | 25 / 55.1 | 25 / 55.1 |
| Permitted total load (kg / lbs) | 65 / 143.3 | 65 / 143.3 | 65 / 143.3 |
| Cable port (?, mm / inch) | 50 / 2.0 | 50 / 2.0 | 50 / 2.0 |
| Water tank capacity (L / cu ft) | 8 / 0.3 | 12 / 0.4 | 12 / 0.4 |
| Weight (kg / lbs) | 80 / 176.4 | 110 / 242.5 | 130 / 286.6 |
| Temperature data | |||
| Range without humidity (℃ / ℉) |
0 to 120 / 32 to 248 |
0 to 120 / 32 to 248 |
0 to 120 / 32 to 248 |
| Fluctuation (±℃ / ℉)?1) | 0.3 / 0.54 | 0.3 / 0.54 | 0.3 / 0.54 |
| Variation (±℃ / ℉)?1) | 0.5 / 0.9 | 0.5 / 0.9 | 0.5 / 0.9 |
| Heating time (0℃ to 90℃) (min) | 40 | 40 | 40 |
| Cooling time (90℃ to 0℃) (min) | 35 | 35 | 35 |
| Humidity data (※ Ref.: Temp./ Humid. control range graph) | |||
| Range (%RH) | 30 to 95 | 30 to 95 | 30 to 95 |
| Fluctuation (±℃ / ℉)?1) | 1 | 1 | 1 |
| Variation (±℃ / ℉)?1) | 3 | 3 | 3 |
| Electrical data & Ordering inbation | |||
| Electrical requirements (AC230V, 1ph, 60Hz) | 9.2A | 11.1A | 13.8A |
| Cat. No. | AAH822131K | AAH822231K | AAH822331K |
| Electrical requirements (AC230V, 1ph, 50Hz) | 9.2A | 11.1A | 13.8A |
| Cat. No. | AAH822132K | AAH822232K | AAH822332K |
※ The above specifications are tested according to DIN 12880 and IEC 60068 standards.
※ Permissible environmental conditions are 18 - 30°C (recommended 20°C), 85% RH or less, under 2000m above sea level.
※ The DI water condition is pH 6.2 - 7.2 and the electrical conductivity is less than 20?/cm.
1) The set value is set under the conditions of 25°C, 60% RH.
2) Heating time condition value: TH3-KE (-40°C to 100°C), TH3-ME (-20°C to 100°C), TH3-PE (0°C to 100°C)
3) Cooling time condition value: TH3-KE (20°C to -40°C), TH3-ME (20°C to -20°C), TH3-PE (20°C to 0°C)
