Electrical Potting System is a filled, low viscosity, low cost, fast gelling, epoxy for use in ambient cured applications. The 2:1 mixing ratio makes it ideal for meter mix or hand processed applications. UL 1446 recognized as a potting compound up to 180C (class H) UL File No. E 210549. Designed for ambient cured or temperature accelerated potting applications where low viscosities are required. Provides a resilient finished product with 180C perbance and is an excellent choice for high volume applications!
PRODUCT DATA
Color
Resin Black
Hardener Amber
Mixed Black
Viscosity, cps @ 25 ?C (ASTM D-2393)
Resin 11,000
Hardener 160
Mixed 1,500
Density, lbs/gal, (specific gravity)
Resin 13.5 (1.62)
Hardener 8.0 (0.96)
Mixed 11.7 (1.40)
Working Time
400g @ 25°C 12 minutes
Mix ratio
By Weight 100 to 29.5
By Volume 100 to 50
Gel time
400g @ 25?C 25 minutes
Hardness
Shore D (0-10 sec) 70-75
Tg, °C ASTM D3418 ASTM D3418ASTM D3418ASTM D3418ASTM D3418 ASTM D3418ASTM D3418ASTM D3418 48
Cure schedule
25?C 3-5 days
66?C 2 hours
Shelf life 12 months
ELECTRICAL PROPERTIES
Dielectric constant
1k Hz 4.0
100 k Hz 3.7
Dissipation factor
1k Hz 0.08
100k Hz 0.03
Dielectric strength, V/ml 400
Volume resistivity, ohm-cm 1.5x1014
Water absorption
24 hours 0.3 %
Thermal conductivity
BTU-in/hr-ft2-?F 2.1
CTE -30?C to 30?C 4.1x10-5 in/?F
7.3/10-5 mm/?C
11G203-20203&7H015-50015 072417
IMPORTANT NOTICE TO PURCHASER:
THE INFORMATION CONTAINED IN THIS BULLETIN IS BASED ON DATA OBTAINED BY OUR OWN RESEARCH AND IS CONSIDERED TO BE ACCURATE. EFI POLYMERS MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is responsible for determining whether the product is fit for a particular purpose and suitable for user’s b of application. Please remember that many factors can affect the use and perbance of a polymer product in a particular application. The customer’s substrate, the surface preparation of those materials, the product selected for the application, the conditions in which the product is to be mixed and used, and the time and environmental conditions in which the product is expected to perb are among the many factors that can affect the use and perbance of a product. Given the variety of factors that can affect the use and perbance of a product, some of which are uniquely within the user’s knowledge and control, it is essential that the user buate the